 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
Southern Trails Saddle
Click on Picture Enlarge
| Southern Trails Saddle is proud to offer our Elite Series Western Saddle Western Saddles, Barrel Saddles, Trail Saddles, Ranch Saddles, Cutting Saddles, Wade Saddles We offer many Modifications for a Great: Trail Saddle, Barrel Saddle, Western Saddles, Ranch Saddle, Wade Saddle, Cutting Saddle, Roping Saddle |
Click on Picture Enlarge
Click on Picture Enlarge
Click on Picture Enlarge
Click on Picture Enlarge
Click on Picture Enlarge
Click on Picture Enlarge
Click on Picture Enlarge
Comfort Series Trail Saddle
Tree: Comfort Trail Tree, Custom Fiberglass Covered Wood The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 15", 16", and 17".
Bars: Available in Simi-QH, Full Quarter Horse, Extra Wide for mutton withers, draft crosses, haflingers, etc.
Weight: Approximately 29 lbs.
Gullet Height: 7.5"
Swell: A-Fork; Width 10".
Skirts: Length 26" (on 16” seat); Width 11" at front and 9" at rear, lined with faux shearling, 90% wool. Click Pic to Enlarge
Cantle: Height 4"; Width 13"; Dish 1 ½"; Style 1 ½" Cheyenne Roll, Hand Sewn. T-9004
Horn: Height 2 ¾", Diameter 2 ½", Leather covered, Hand Sewn.
Stirrup Leathers: 2 ½" with Leather Covered Blevins Buckles, machine sewn and copper riveted
at the Blevins Buckles and the top of the fenders
Stirrups: Wooden metal bound natural rawhide covered, hand laced bell stirrups with 3" treads.
Rigging: Dropped plate rigging in 7/8’s position. Hardware is Stainless Steel Horseshoe Brand.
Leather: Available with 13-15 oz. Thoroughbred Mahogany, Walnut, or Golden Skirting.
Trim: Horseshoe Brand Cathedral Conchos with Tie Loops, All Hardware including the saddle screws and washers is Stainless Steel. Saddle strings cut from
premium 5-7 oz. burgundy latigo. The bicycle style padded seat is constructed with 3/8" close cell foam covered with 4-5 oz. chap leather. We use the Union
Lockstitch to sew and pull the 277 white nylon thread tight at 5 ½ stitches to the inch.
Finish: Each B-Light Trail Saddle first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner.
Tooling: Border Tooled with stems and turnbacks.
Special Price $ 1,295.00 # T-9002 Bucking Rolls Add $85.00 # T-9004 Special Price with Rear 3 Piece Cinch and Bucking Rolls $ 1,495.00
Tree: Comfort Trail Tree, Custom Fiberglass Covered Wood The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 15", 16", and 17".
Bars: Available in Simi-QH, Full Quarter Horse, Extra Wide for mutton withers, draft crosses, haflingers, etc.
Weight: Approximately 29 lbs.
Gullet Height: 7.5"
Swell: A-Fork; Width 10".
Skirts: Length 26" (on 16” seat); Width 11" at front and 9" at rear, lined with faux shearling, 90% wool. Click Pic to Enlarge
Cantle: Height 4"; Width 13"; Dish 1 ½"; Style 1 ½" Cheyenne Roll, Hand Sewn. T-9004
Horn: Height 2 ¾", Diameter 2 ½", Leather covered, Hand Sewn.
Stirrup Leathers: 2 ½" with Leather Covered Blevins Buckles, machine sewn and copper riveted
at the Blevins Buckles and the top of the fenders
Stirrups: Wooden metal bound natural rawhide covered, hand laced bell stirrups with 3" treads.
Rigging: Dropped plate rigging in 7/8’s position. Hardware is Stainless Steel Horseshoe Brand.
Leather: Available with 13-15 oz. Thoroughbred Mahogany, Walnut, or Golden Skirting.
Trim: Horseshoe Brand Cathedral Conchos with Tie Loops, All Hardware including the saddle screws and washers is Stainless Steel. Saddle strings cut from
premium 5-7 oz. burgundy latigo. The bicycle style padded seat is constructed with 3/8" close cell foam covered with 4-5 oz. chap leather. We use the Union
Lockstitch to sew and pull the 277 white nylon thread tight at 5 ½ stitches to the inch.
Finish: Each B-Light Trail Saddle first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner.
Tooling: Border Tooled with stems and turnbacks.
Special Price $ 1,295.00 # T-9002 Bucking Rolls Add $85.00 # T-9004 Special Price with Rear 3 Piece Cinch and Bucking Rolls $ 1,495.00
B-5200 Barrel Saddle
Tree: Custom Barrel Racer, Reinforced Wood. The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer.
Seat Size: Available in 14 ½", and 15 ½".
Weight: Approximately 28 lbs.
Gullet Width: 6 ½" SQH, 6.75", RQH, 7" FQH - Gullet Height 7.5"
Swell: Round Fork; Width 12".
Skirts: Length 25" (on 15 ½"seat), 24” on 14 ½" seat; Width 10 ½", lined with faux shearling, 90% wool.
Cantle: Height 4"; Width 11 ¼"; Dish 1 ¼"; Style 1 ½" Cheyenne Roll, Hand Sewn.
Horn: Height 3 ¾", Diameter 1 ¾" Leather covered, Hand Sewn.
Stirrup Leathers: 2 ½" with Leather Covered Blevins Buckles, machine sewn and copper riveted at the Blevins Buckles and the top of the
fenders
Stirrups: Off-set Aluminum
Rigging: Horseshoe Brand Flat Plate dropped in-skirt, 7/8’s position, 2 ½" recessed beveled stainless steel dees in rear.
Leather: Premium 13-15 oz. Thoroughbred Golden Skirting.
Trim: Horseshoe Brand Floral Slotted Conchos with black accents. All Hardware including the saddle screws and washers is Stainless
Steel. 12" mock saddle strings cut from premium 5-7 oz. burgundy latigo. The bicycle style padded seat is constructed with 3/8"
close cell foam covered with black ostrich print cowhide. We use the Union Lockstitch to sew and pull the 277 white nylon thread
tight at 5 ½ stitches to the inch.
Finish: Each Saddle first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner.
Tooling: All done by Hand, Hamley swirl with barb wire border. - Other Styles available
Special Price $ 1,295.00 # B-5200 ---------- Note: Other Color Oils Available
Tree: Custom Barrel Racer, Reinforced Wood. The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer.
Seat Size: Available in 14 ½", and 15 ½".
Weight: Approximately 28 lbs.
Gullet Width: 6 ½" SQH, 6.75", RQH, 7" FQH - Gullet Height 7.5"
Swell: Round Fork; Width 12".
Skirts: Length 25" (on 15 ½"seat), 24” on 14 ½" seat; Width 10 ½", lined with faux shearling, 90% wool.
Cantle: Height 4"; Width 11 ¼"; Dish 1 ¼"; Style 1 ½" Cheyenne Roll, Hand Sewn.
Horn: Height 3 ¾", Diameter 1 ¾" Leather covered, Hand Sewn.
Stirrup Leathers: 2 ½" with Leather Covered Blevins Buckles, machine sewn and copper riveted at the Blevins Buckles and the top of the
fenders
Stirrups: Off-set Aluminum
Rigging: Horseshoe Brand Flat Plate dropped in-skirt, 7/8’s position, 2 ½" recessed beveled stainless steel dees in rear.
Leather: Premium 13-15 oz. Thoroughbred Golden Skirting.
Trim: Horseshoe Brand Floral Slotted Conchos with black accents. All Hardware including the saddle screws and washers is Stainless
Steel. 12" mock saddle strings cut from premium 5-7 oz. burgundy latigo. The bicycle style padded seat is constructed with 3/8"
close cell foam covered with black ostrich print cowhide. We use the Union Lockstitch to sew and pull the 277 white nylon thread
tight at 5 ½ stitches to the inch.
Finish: Each Saddle first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner.
Tooling: All done by Hand, Hamley swirl with barb wire border. - Other Styles available
Special Price $ 1,295.00 # B-5200 ---------- Note: Other Color Oils Available
B-5700 Barrel Racing Saddle
Tree: Barrel Racer, Custom Rawhide Covered Wood. The ground work is hand shaped using skirting leather over a 20 gauge strainer.
Seat Size: Available in 14 ½", and 15 ½".
Weight: Approximately 28 lbs.
Gullet Width: 6 ½" SQH, 6.75", RQH, 7" FQH - Gullet Height: 8"
Swell: CJ Fork; Width 12 ½".
Skirts: Length 25 ½" (on 15"seat); Width 10 ½", lined with wool shearling, 1" density.
Cantle: Height 4"; Width 12 ½"; Dish 1 ¾"; Style 1 ½" Cheyenne Roll, Hand Sewn.
Horn: Height 3 ½", Diameter 1 ¾" Leather covered, Hand Sewn.
Stirrup Leathers: 2 ½" with Leather Covered Blevins Buckles, machine sewn and copper riveted at the Buckles and the top of the fenders
Stirrups: Off-set Aluminum
Rigging: In-skirt, 7/8’s position, 2 ½" recessed beveled stainless steel dees in rear.
Leather: 13-15 oz. Thoroughbred Golden Skirting.
Trim: Berry Conchos with crystals. All Hardware including the saddle screws and washers is Stainless Steel. The bicycle style padded
seat is constructed with 3/8" close cell foam covered with your choice of exotic hides. We use the Union Lockstitch to sew and pull the
277 white nylon thread tight at 5 ½ stitches to the inch.
Finish: Each Exotic Barrel Saddle first receives a warm coat of 100% pure neatsfoot oil and a generous coat of Aussie Leather Conditioner.
Special Price $ 1,895.00 # B-5700 --------- Note: Other Color Oils Available, Other Ostrich Leather Seat Color Choices Avail.
Tree: Barrel Racer, Custom Rawhide Covered Wood. The ground work is hand shaped using skirting leather over a 20 gauge strainer.
Seat Size: Available in 14 ½", and 15 ½".
Weight: Approximately 28 lbs.
Gullet Width: 6 ½" SQH, 6.75", RQH, 7" FQH - Gullet Height: 8"
Swell: CJ Fork; Width 12 ½".
Skirts: Length 25 ½" (on 15"seat); Width 10 ½", lined with wool shearling, 1" density.
Cantle: Height 4"; Width 12 ½"; Dish 1 ¾"; Style 1 ½" Cheyenne Roll, Hand Sewn.
Horn: Height 3 ½", Diameter 1 ¾" Leather covered, Hand Sewn.
Stirrup Leathers: 2 ½" with Leather Covered Blevins Buckles, machine sewn and copper riveted at the Buckles and the top of the fenders
Stirrups: Off-set Aluminum
Rigging: In-skirt, 7/8’s position, 2 ½" recessed beveled stainless steel dees in rear.
Leather: 13-15 oz. Thoroughbred Golden Skirting.
Trim: Berry Conchos with crystals. All Hardware including the saddle screws and washers is Stainless Steel. The bicycle style padded
seat is constructed with 3/8" close cell foam covered with your choice of exotic hides. We use the Union Lockstitch to sew and pull the
277 white nylon thread tight at 5 ½ stitches to the inch.
Finish: Each Exotic Barrel Saddle first receives a warm coat of 100% pure neatsfoot oil and a generous coat of Aussie Leather Conditioner.
Special Price $ 1,895.00 # B-5700 --------- Note: Other Color Oils Available, Other Ostrich Leather Seat Color Choices Avail.
Click on Picture Enlarge
B-5600 Exotic Barrel Racing Saddle
Tree: Barrel Racer, Custom Rawhide Covered Wood. The ground work is hand shaped using skirting leather over a 20 gauge strainer.
Seat Size: Available in 14 ½", and 15 ½".
Weight: Approximately 29 lbs.
Gullet Width: 6 ½" SQH, 6.75", RQH, 7" FQH - Gullet Height: 8"
Swell: CJ Fork; Width 12 ½".
Skirts: Length 25 ½" (on 15"seat); Width 10 ½", lined with wool shearling, 1" density.
Cantle: Height 4"; Width 12 ½"; Dish 1 ¾"; Style 1 ½" Cheyenne Roll, Hand Sewn.
Horn: Height 3 ½", Diameter 1 ¾" Leather covered, Hand Sewn.
Stirrup Leathers: 2 ½" with Leather Covered Blevins Buckles, machine sewn and copper riveted at the Buckles and the top of the fenders
Stirrups: Off-set Aluminum
Rigging: In-skirt, 7/8’s position, 2 ½" recessed beveled stainless steel dees in rear.
Leather: 13-15 oz. Thoroughbred Golden Skirting.
Trim: Berry Conchos with crystals. All Hardware including the saddle screws and washers is Stainless Steel. The bicycle style padded
seat is constructed with 3/8" close cell foam covered with your choice of exotic hides. We use the Union Lockstitch to sew and pull the
277 white nylon thread tight at 5 ½ stitches to the inch.
Finish: Each Exotic Barrel Saddle first receives a warm coat of 100% pure neatsfoot oil and a generous coat of Aussie Leather Conditioner.
Special Price $ 1,895.00 # B-5600 --------- Note: Other Color Oils Available
Tree: Barrel Racer, Custom Rawhide Covered Wood. The ground work is hand shaped using skirting leather over a 20 gauge strainer.
Seat Size: Available in 14 ½", and 15 ½".
Weight: Approximately 29 lbs.
Gullet Width: 6 ½" SQH, 6.75", RQH, 7" FQH - Gullet Height: 8"
Swell: CJ Fork; Width 12 ½".
Skirts: Length 25 ½" (on 15"seat); Width 10 ½", lined with wool shearling, 1" density.
Cantle: Height 4"; Width 12 ½"; Dish 1 ¾"; Style 1 ½" Cheyenne Roll, Hand Sewn.
Horn: Height 3 ½", Diameter 1 ¾" Leather covered, Hand Sewn.
Stirrup Leathers: 2 ½" with Leather Covered Blevins Buckles, machine sewn and copper riveted at the Buckles and the top of the fenders
Stirrups: Off-set Aluminum
Rigging: In-skirt, 7/8’s position, 2 ½" recessed beveled stainless steel dees in rear.
Leather: 13-15 oz. Thoroughbred Golden Skirting.
Trim: Berry Conchos with crystals. All Hardware including the saddle screws and washers is Stainless Steel. The bicycle style padded
seat is constructed with 3/8" close cell foam covered with your choice of exotic hides. We use the Union Lockstitch to sew and pull the
277 white nylon thread tight at 5 ½ stitches to the inch.
Finish: Each Exotic Barrel Saddle first receives a warm coat of 100% pure neatsfoot oil and a generous coat of Aussie Leather Conditioner.
Special Price $ 1,895.00 # B-5600 --------- Note: Other Color Oils Available
M-3000 Mounted Shooting Saddle or Old Fashioned trail Saddle
Tree: Custom Mounted Shooter Tree. Rawhide Covered Wood. The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 14", 15 " and 16".
Weight: Approximately 38 lbs.
Gullet Width: 6 ¾" QH Bars
Gullet Height: 8 ½"
Swell: Round Fork; Width 12".
Skirts: Length 27" (on 16"seat); Width 12 ½", lined with faux shearling, 90% wool.
Cantle: Height 4"; Width 13"; Dish 1 ½"; Style ½" Pencil Roll, Hand Sewn.
Horn: Height 3 1/4", Diameter 2 1/4" Leather covered, Hand Sewn.
Stirrup Leathers: 2 ½" with Leather Covered Blevins Buckles, machine sewn and copper riveted at the Blevins Buckles and the top of the fenders
Stirrups: Wooden 3" Bell
Rigging: Sam Stagg in 7/8's position, leather covered stainless steel dees. Rigged with four 1 ¾" tie straps.
Leather: Premium 13-15 oz. Thoroughbred Walnut Skirting.
Trim: All Hardware including the saddle screws and washers is Stainless Steel. Saddle strings on this eight string set hang 36" from the rear button, 18"
from the
seat buttons, and 24" from the front button. We use the Union Lockstitch to sew and pull the 277 white nylon thread tight at 5 ½ stitches to the inch.
Finish: Each Mounted Shooter Saddle first receives several warm coats of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner.
Tooling: Running W border.
Style: A unique combination of period styling and today's comfort allow us to offer you a saddle with the authentic look you're after and yet have the feel of a
competition saddle.
Special Price $ 1,895.00 # M-3000 Other Oil Colors Available
Tree: Custom Mounted Shooter Tree. Rawhide Covered Wood. The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 14", 15 " and 16".
Weight: Approximately 38 lbs.
Gullet Width: 6 ¾" QH Bars
Gullet Height: 8 ½"
Swell: Round Fork; Width 12".
Skirts: Length 27" (on 16"seat); Width 12 ½", lined with faux shearling, 90% wool.
Cantle: Height 4"; Width 13"; Dish 1 ½"; Style ½" Pencil Roll, Hand Sewn.
Horn: Height 3 1/4", Diameter 2 1/4" Leather covered, Hand Sewn.
Stirrup Leathers: 2 ½" with Leather Covered Blevins Buckles, machine sewn and copper riveted at the Blevins Buckles and the top of the fenders
Stirrups: Wooden 3" Bell
Rigging: Sam Stagg in 7/8's position, leather covered stainless steel dees. Rigged with four 1 ¾" tie straps.
Leather: Premium 13-15 oz. Thoroughbred Walnut Skirting.
Trim: All Hardware including the saddle screws and washers is Stainless Steel. Saddle strings on this eight string set hang 36" from the rear button, 18"
from the
seat buttons, and 24" from the front button. We use the Union Lockstitch to sew and pull the 277 white nylon thread tight at 5 ½ stitches to the inch.
Finish: Each Mounted Shooter Saddle first receives several warm coats of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner.
Tooling: Running W border.
Style: A unique combination of period styling and today's comfort allow us to offer you a saddle with the authentic look you're after and yet have the feel of a
competition saddle.
Special Price $ 1,895.00 # M-3000 Other Oil Colors Available
W-3600 Wade Rancher
Tree: Wade Ranch Tree, Custom Fiberglass Covered Wood, The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 15" and 16".
Weight: Approximately 39 lbs.
Gullet Width: 7" Full QH Bars -- Other Available
Gullet Height: 7 ¾"
Swell: Wade Fork; Width 11"
Skirts: Length 27"; Width 11 ½", lined with genuine bark tan 1" thick wool shearlings, 1" density.
Cantle: Height 4"; Width 13"; Dish 1 ½"; Style 1 ½" Natural Rawhide Pencil Roll, Hand Sewn.
Horn: Height 2", Diameter 4 ¾", capped and wrapped, natural rawhide tipped, hand sewn with mule hide wrap.
Stirrup Leathers: Exposed 3" with leather covered Blevins Buckles and oak leaf & acorn hand tooling. Nevada twist with burgundy latigo wrap.
Stirrups: Wooden metal bound natural rawhide covered, hand laced bell stirrups with 3" treads.
Rigging: Dropped plate rigging in 7/8’s position. Hardware is Stainless Steel Horseshoe Brand.
Flank Cincha: 6" tapering to 4" to 1 ¾"; burgundy latigo lined with stainless steel roller buckles.
Leather: 15-17 oz. Thoroughbred Mahogany Skirting.
Trim: All Hardware including the saddle screws and washers is stainless steel. Saddle strings cut from premium 5-7 oz. burgundy latigo. We use the Union
Lockstitch to sew and pull the 346 white nylon thread tight at 4 ½ stitches to the inch.
Finish: Each Wade Rancher first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner. Edges are
burnished by hand rubbing.
Tooling: Hand carved Oak Leaf and Acorn with Carlos Border.
Special Price $ 2,795.00 # W-3600 Bucking Rolls are Standard, can be left off
Tree: Wade Ranch Tree, Custom Fiberglass Covered Wood, The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 15" and 16".
Weight: Approximately 39 lbs.
Gullet Width: 7" Full QH Bars -- Other Available
Gullet Height: 7 ¾"
Swell: Wade Fork; Width 11"
Skirts: Length 27"; Width 11 ½", lined with genuine bark tan 1" thick wool shearlings, 1" density.
Cantle: Height 4"; Width 13"; Dish 1 ½"; Style 1 ½" Natural Rawhide Pencil Roll, Hand Sewn.
Horn: Height 2", Diameter 4 ¾", capped and wrapped, natural rawhide tipped, hand sewn with mule hide wrap.
Stirrup Leathers: Exposed 3" with leather covered Blevins Buckles and oak leaf & acorn hand tooling. Nevada twist with burgundy latigo wrap.
Stirrups: Wooden metal bound natural rawhide covered, hand laced bell stirrups with 3" treads.
Rigging: Dropped plate rigging in 7/8’s position. Hardware is Stainless Steel Horseshoe Brand.
Flank Cincha: 6" tapering to 4" to 1 ¾"; burgundy latigo lined with stainless steel roller buckles.
Leather: 15-17 oz. Thoroughbred Mahogany Skirting.
Trim: All Hardware including the saddle screws and washers is stainless steel. Saddle strings cut from premium 5-7 oz. burgundy latigo. We use the Union
Lockstitch to sew and pull the 346 white nylon thread tight at 4 ½ stitches to the inch.
Finish: Each Wade Rancher first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner. Edges are
burnished by hand rubbing.
Tooling: Hand carved Oak Leaf and Acorn with Carlos Border.
Special Price $ 2,795.00 # W-3600 Bucking Rolls are Standard, can be left off
W-3500 Wade Saddle
Tree: Wade Tree Saddle, Custom Fiberglass Covered Wood, The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 15" and 16".
Bars: Full Quarter Horse Arizona Bars
Weight: Approximately 38 lbs.
Gullet Width: 7"
Gullet Height: 7 ¾"
Swell: Wade Fork; Width 11"
Skirts: Length 27"; Width 11 ½", lined with genuine bark tan 1" thick wool shearlings, 1” density.
Cantle: Height 4"; Width 13"; Dish 1 ½"; Style 1 ½" Natural Rawhide Pencil Roll, Hand Sewn.
Horn: Height 2", Diameter 4 ¾", capped and wrapped, natural rawhide tipped, hand sewn with mule hide wrap.
Stirrup Leathers: 3" with leather covered Blevins Buckles. Nevada twist with burgundy latigo wrap.
Stirrups: Wooden metal bound natural rawhide covered, hand laced bell stirrups with 3" treads.
Rigging: Horseshoe Brand Flat Plate dropped in-skirt, 7/8’s position, 2 ½" beveled stainless steel dees in rear.
Flank Cincha: 3" tapering to 1 ¾"; burgundy latigo lined with stainless steel roller buckles.
Leather: 13-15 oz. Premium Thoroughbred Mahogany Skirting.
Trim: All Hardware including the saddle screws and washers is stainless steel. Saddle strings cut from premium 5-7 oz. burgundy latigo. We use the Union
Lockstitch to sew and pull the 346 white nylon thread tight at 4 ½ stitches to the inch.
Finish: Each Wade Saddle first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner. Edges are
burnished by hand rubbing.
Tooling: Floral with Carlos Border.
Special Price $ 2,595.00 # W-3500 Bucking Rolls are Standard, can be left off
Tree: Wade Tree Saddle, Custom Fiberglass Covered Wood, The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 15" and 16".
Bars: Full Quarter Horse Arizona Bars
Weight: Approximately 38 lbs.
Gullet Width: 7"
Gullet Height: 7 ¾"
Swell: Wade Fork; Width 11"
Skirts: Length 27"; Width 11 ½", lined with genuine bark tan 1" thick wool shearlings, 1” density.
Cantle: Height 4"; Width 13"; Dish 1 ½"; Style 1 ½" Natural Rawhide Pencil Roll, Hand Sewn.
Horn: Height 2", Diameter 4 ¾", capped and wrapped, natural rawhide tipped, hand sewn with mule hide wrap.
Stirrup Leathers: 3" with leather covered Blevins Buckles. Nevada twist with burgundy latigo wrap.
Stirrups: Wooden metal bound natural rawhide covered, hand laced bell stirrups with 3" treads.
Rigging: Horseshoe Brand Flat Plate dropped in-skirt, 7/8’s position, 2 ½" beveled stainless steel dees in rear.
Flank Cincha: 3" tapering to 1 ¾"; burgundy latigo lined with stainless steel roller buckles.
Leather: 13-15 oz. Premium Thoroughbred Mahogany Skirting.
Trim: All Hardware including the saddle screws and washers is stainless steel. Saddle strings cut from premium 5-7 oz. burgundy latigo. We use the Union
Lockstitch to sew and pull the 346 white nylon thread tight at 4 ½ stitches to the inch.
Finish: Each Wade Saddle first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner. Edges are
burnished by hand rubbing.
Tooling: Floral with Carlos Border.
Special Price $ 2,595.00 # W-3500 Bucking Rolls are Standard, can be left off
Tree: Wade Tree Saddle, Custom Fiberglass Covered Wood, The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 15" and 16".
Weight: Approximately 36 lbs.
Gullet Width: 7" Full Quarter Horse Bars - Other Available
Gullet Height: 7 ¾"
Swell: Wade Fork; Width 11"
Skirts: Length 27"; Width 12 ½", lined with genuine bark tan 1" thick wool shearlings, 1" density.
Cantle: Height 4"; Width 13"; Dish 1 ½"; Style 1 ½" Natural Rawhide Pencil Roll, Hand Sewn.
Horn: Height 2", Diameter 4 ¾", capped and wrapped, natural rawhide tipped, hand sewn with mule hide wrap.
Stirrup Leathers: 3" with leather covered Blevins Buckles. Nevada twist with burgundy latigo wrap.
Stirrups: Wooden metal bound natural rawhide covered, hand laced bell stirrups with 3" treads.
Rigging: Horseshoe Brand Flat Plate dropped in-skirt, 7/8’s position, 2 ½" beveled stainless steel dees in rear.
Flank Cincha: 3" tapering to 1 ¾"; burgundy latigo lined with stainless steel roller buckles.
Leather: 13-15 oz. Thoroughbred Golden rough side out, buffed.
Trim: All Hardware including the saddle screws and washers is stainless steel. Saddle strings cut from premium 5-7 oz. burgundy latigo. We use the Union
Lockstitch to sew and pull the 346 white nylon thread tight at 4 ½ stitches to the inch.
Finish: Each Rough Out Wade first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner
Edges are burnished by hand rubbing.
Special Price $ 2,095.00 # W-3700 Bucking Rolls are Standard, can be left off
Seat Size: Available in 15" and 16".
Weight: Approximately 36 lbs.
Gullet Width: 7" Full Quarter Horse Bars - Other Available
Gullet Height: 7 ¾"
Swell: Wade Fork; Width 11"
Skirts: Length 27"; Width 12 ½", lined with genuine bark tan 1" thick wool shearlings, 1" density.
Cantle: Height 4"; Width 13"; Dish 1 ½"; Style 1 ½" Natural Rawhide Pencil Roll, Hand Sewn.
Horn: Height 2", Diameter 4 ¾", capped and wrapped, natural rawhide tipped, hand sewn with mule hide wrap.
Stirrup Leathers: 3" with leather covered Blevins Buckles. Nevada twist with burgundy latigo wrap.
Stirrups: Wooden metal bound natural rawhide covered, hand laced bell stirrups with 3" treads.
Rigging: Horseshoe Brand Flat Plate dropped in-skirt, 7/8’s position, 2 ½" beveled stainless steel dees in rear.
Flank Cincha: 3" tapering to 1 ¾"; burgundy latigo lined with stainless steel roller buckles.
Leather: 13-15 oz. Thoroughbred Golden rough side out, buffed.
Trim: All Hardware including the saddle screws and washers is stainless steel. Saddle strings cut from premium 5-7 oz. burgundy latigo. We use the Union
Lockstitch to sew and pull the 346 white nylon thread tight at 4 ½ stitches to the inch.
Finish: Each Rough Out Wade first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner
Edges are burnished by hand rubbing.
Special Price $ 2,095.00 # W-3700 Bucking Rolls are Standard, can be left off
Click on Picture Enlarge
Click on Picture Enlarge
Click on Picture Enlarge
Click on Picture Enlarge
R-8200 Ranch Roping Saddle
Tree: Working Ranch Saddle, Batie Rawhide covered and rawhide laced. The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 15" and 16".
Weight: Approximately 42 lbs.
Gullet Width: 6.75" Quarter Horse Bars - others available
Gullet Height: 7 ¼"
Swell: Width 12 ½"
Skirts: Length 27 ½"; Width 12", lined with genuine bark tan 1" thick wool shearling, 1" density.
Cantle: Height 4" Width 12 ½"; Dish 1 ½"; Style ½" Natural Rawhide Covered Pencil Roll, Hand Sewn.
Horn: Height 3 ½", Diameter 2 ½", rawhide tipped, leather covered, hand sewn with mule hide horn wrap.
Stirrup Leathers: 3" with leather covered Blevins Buckles
Stirrups: Wooden metal bound natural rawhide covered, hand laced bell stirrups with 3" treads.
Rigging: Dropped plate rigging in 7/8’s position. Hardware is Stainless Steel Horseshoe Brand.
Flank Cincha: 6" tapering to 4" to 1 ¾"; burgundy latigo lined with deluxe stainless steel roller buckles.
Leather: 15-17 oz. Premium Thoroughbred Walnut Skirting.
Trim: All Hardware including the saddle screws and washers is stainless steel. Saddle strings cut from premium 7-8 oz. burgundy latigo. We use the Union
Lockstitch to sew and pull the 277 white nylon thread tight at 5 1/2 stitches to the inch.
Finish: Each Working Rancher receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner. Edges are burnished
by hand rubbing.
Tooling: Hand carved floral and Hamley swirl with lined petal border.
Special Price $ 1,995.00 # R-8200
Tree: Working Ranch Saddle, Batie Rawhide covered and rawhide laced. The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 15" and 16".
Weight: Approximately 42 lbs.
Gullet Width: 6.75" Quarter Horse Bars - others available
Gullet Height: 7 ¼"
Swell: Width 12 ½"
Skirts: Length 27 ½"; Width 12", lined with genuine bark tan 1" thick wool shearling, 1" density.
Cantle: Height 4" Width 12 ½"; Dish 1 ½"; Style ½" Natural Rawhide Covered Pencil Roll, Hand Sewn.
Horn: Height 3 ½", Diameter 2 ½", rawhide tipped, leather covered, hand sewn with mule hide horn wrap.
Stirrup Leathers: 3" with leather covered Blevins Buckles
Stirrups: Wooden metal bound natural rawhide covered, hand laced bell stirrups with 3" treads.
Rigging: Dropped plate rigging in 7/8’s position. Hardware is Stainless Steel Horseshoe Brand.
Flank Cincha: 6" tapering to 4" to 1 ¾"; burgundy latigo lined with deluxe stainless steel roller buckles.
Leather: 15-17 oz. Premium Thoroughbred Walnut Skirting.
Trim: All Hardware including the saddle screws and washers is stainless steel. Saddle strings cut from premium 7-8 oz. burgundy latigo. We use the Union
Lockstitch to sew and pull the 277 white nylon thread tight at 5 1/2 stitches to the inch.
Finish: Each Working Rancher receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner. Edges are burnished
by hand rubbing.
Tooling: Hand carved floral and Hamley swirl with lined petal border.
Special Price $ 1,995.00 # R-8200
R-2200 Roping Saddle
Tree: Working Roper, Custom Fiberglass Covered Wood The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 14", 15, and 16" (half sizes available on special order).
Weight: Approximately 42 lbs.
Gullet Width: 6.75" Quarter Hose Bars - Others Available
Gullet Height: 7 ½"
Swell: Roper with leg cut; Width 12 ½"
Skirts: Length 27"; Width 13 ½", lined with faux shearling, 90% wool.
Cantle: Height 3 ½" Width 12”; Dish 1 ¼”; Style 1 ¾” Cheyenne Roll, Hand Sewn.
Horn: Height 3 ½”, Diameter 2 ½", leather covered, hand sewn.
Stirrup Leathers: 3" with leather covered Blevins Buckles
Stirrups: Leather covered wooden deep roper stirrups with hand laced leather treads.
Rigging: Double dee rigging in 7/8’s position. Hardware is Stainless Steel.
Flank Cincha: 6" tapering to 4" to 1 ¾"; burgundy latigo lined with deluxe stainless steel roller buckles.
Leather: 15-17 oz. Thoroughbred Golden Skirting.
Trim: Antique finish Texas Star conchos. All Hardware including the saddle screws and washers is stainless steel. We use the Union Lockstitch to sew and
pull the 277 white nylon thread tight at 5 1/2 stitches to the inch.
Finish: Each Working Class Roper Saddle first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner.
Edges are burnished by hand rubbing and died dark brown.
Tooling: 5/8" Horseshoe Brand geometric block with seed and Running W Border.
Special Price $ 1,895.00 # R-2200
Tree: Working Roper, Custom Fiberglass Covered Wood The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 14", 15, and 16" (half sizes available on special order).
Weight: Approximately 42 lbs.
Gullet Width: 6.75" Quarter Hose Bars - Others Available
Gullet Height: 7 ½"
Swell: Roper with leg cut; Width 12 ½"
Skirts: Length 27"; Width 13 ½", lined with faux shearling, 90% wool.
Cantle: Height 3 ½" Width 12”; Dish 1 ¼”; Style 1 ¾” Cheyenne Roll, Hand Sewn.
Horn: Height 3 ½”, Diameter 2 ½", leather covered, hand sewn.
Stirrup Leathers: 3" with leather covered Blevins Buckles
Stirrups: Leather covered wooden deep roper stirrups with hand laced leather treads.
Rigging: Double dee rigging in 7/8’s position. Hardware is Stainless Steel.
Flank Cincha: 6" tapering to 4" to 1 ¾"; burgundy latigo lined with deluxe stainless steel roller buckles.
Leather: 15-17 oz. Thoroughbred Golden Skirting.
Trim: Antique finish Texas Star conchos. All Hardware including the saddle screws and washers is stainless steel. We use the Union Lockstitch to sew and
pull the 277 white nylon thread tight at 5 1/2 stitches to the inch.
Finish: Each Working Class Roper Saddle first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner.
Edges are burnished by hand rubbing and died dark brown.
Tooling: 5/8" Horseshoe Brand geometric block with seed and Running W Border.
Special Price $ 1,895.00 # R-2200
R-8300 Roping Saddle
Tree: Ranch Working Roper, rawhide covered and rawhide laced, The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 15" and 16".
Weight: Approximately 42 lbs.
Gullet Width: 6.75" QH Bars - Others Available
Gullet Height: 7 ¼"
Swell: Width 12 ½"
Skirts: Length 27 ½"; Width 13", lined with genuine bark tan 1" thick wool shearling, 1" density.
Cantle: Height 4" Width 12 ½"; Dish 1 ½"; Style 1 ¾" Natural Rawhide Covered 1 ½" Cheyenne Roll, Hand Sewn.
Horn: Height 3 ½", Diameter 2 ½", rawhide tipped, leather covered.
Stirrup Leathers: 3" with leather covered Blevins Buckles
Stirrups: Wooden metal bound natural rawhide covered, hand laced bell stirrups with 3" treads.
Rigging: Double Dee rigging in 7/8’s position. Hardware is stainless steel.
Flank Cincha: 6" tapering to 4" to 1 ¾"; burgundy latigo lined with deluxe stainless steel roller buckles.
Leather: 15-17 oz. Thoroughbred Walnut Skirting.
Trim: All Hardware including the saddle screws and washers is stainless steel. Saddle strings cut from premium 7-8 oz. burgundy latigo. We use the Union
Lockstitch to sew and pull the 277 white nylon thread tight at 5 1/2 stitches to the inch.
Finish: Each Ranch Roper receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner. Edges are burnished by
hand rubbing.
Tooling: Hand carved floral and Hamley swirl with lined petal border.
Special Price $ 1,995.00 # R-8300
Tree: Ranch Working Roper, rawhide covered and rawhide laced, The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 15" and 16".
Weight: Approximately 42 lbs.
Gullet Width: 6.75" QH Bars - Others Available
Gullet Height: 7 ¼"
Swell: Width 12 ½"
Skirts: Length 27 ½"; Width 13", lined with genuine bark tan 1" thick wool shearling, 1" density.
Cantle: Height 4" Width 12 ½"; Dish 1 ½"; Style 1 ¾" Natural Rawhide Covered 1 ½" Cheyenne Roll, Hand Sewn.
Horn: Height 3 ½", Diameter 2 ½", rawhide tipped, leather covered.
Stirrup Leathers: 3" with leather covered Blevins Buckles
Stirrups: Wooden metal bound natural rawhide covered, hand laced bell stirrups with 3" treads.
Rigging: Double Dee rigging in 7/8’s position. Hardware is stainless steel.
Flank Cincha: 6" tapering to 4" to 1 ¾"; burgundy latigo lined with deluxe stainless steel roller buckles.
Leather: 15-17 oz. Thoroughbred Walnut Skirting.
Trim: All Hardware including the saddle screws and washers is stainless steel. Saddle strings cut from premium 7-8 oz. burgundy latigo. We use the Union
Lockstitch to sew and pull the 277 white nylon thread tight at 5 1/2 stitches to the inch.
Finish: Each Ranch Roper receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner. Edges are burnished by
hand rubbing.
Tooling: Hand carved floral and Hamley swirl with lined petal border.
Special Price $ 1,995.00 # R-8300
Tree: Working Roper, Custom rawhide covered and rawhide laced. . The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 14", 15, and 16" (half sizes available on special order).
Weight: Approximately 42 lbs.
Gullet Width: 6.75" QH Bars - others available
Gullet Height: 7 ½"
Swell: Pro Roper with leg cut; Width 12"
Skirts: Length 27"; Width 14 ½", lined with genuine bark tan 1" thick wool shearlings, 1" density.
Cantle: Height 3 ½" Width 12”; Dish 1 ¼”; Style 1 ¾” Cheyenne Roll, Hand Sewn.
Horn: Height 3 ½”, Diameter 2 ½", leather covered, hand sewn.
Stirrup Leathers: 3" with leather covered Blevins Buckles
Stirrups: Leather covered wooden deep roper stirrups with hand laced leather treads.
Rigging: Double dee rigging in 7/8’s position. Hardware is Stainless Steel.
Flank Cincha: 6" tapering to 4" to 1 ¾"; burgundy latigo lined with deluxe stainless steel roller buckles.
Leather: 15-17 oz. Premium Thoroughbred Golden Skirting.
Trim: GS berry conchos. All Hardware including the saddle screws and washers is stainless steel. We use the Union Lockstitch to sew and pull the 346 white
nylon thread tight at 5 1/2 stitches to the inch.
Finish: Each Working Roper first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner. Edges are
burnished by hand rubbing and died dark brown.
Tooling: Hand carved Oak Leaf and Waffle with Shell Border.
Special Price $ 1,995.00 # R-2400
Seat Size: Available in 14", 15, and 16" (half sizes available on special order).
Weight: Approximately 42 lbs.
Gullet Width: 6.75" QH Bars - others available
Gullet Height: 7 ½"
Swell: Pro Roper with leg cut; Width 12"
Skirts: Length 27"; Width 14 ½", lined with genuine bark tan 1" thick wool shearlings, 1" density.
Cantle: Height 3 ½" Width 12”; Dish 1 ¼”; Style 1 ¾” Cheyenne Roll, Hand Sewn.
Horn: Height 3 ½”, Diameter 2 ½", leather covered, hand sewn.
Stirrup Leathers: 3" with leather covered Blevins Buckles
Stirrups: Leather covered wooden deep roper stirrups with hand laced leather treads.
Rigging: Double dee rigging in 7/8’s position. Hardware is Stainless Steel.
Flank Cincha: 6" tapering to 4" to 1 ¾"; burgundy latigo lined with deluxe stainless steel roller buckles.
Leather: 15-17 oz. Premium Thoroughbred Golden Skirting.
Trim: GS berry conchos. All Hardware including the saddle screws and washers is stainless steel. We use the Union Lockstitch to sew and pull the 346 white
nylon thread tight at 5 1/2 stitches to the inch.
Finish: Each Working Roper first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner. Edges are
burnished by hand rubbing and died dark brown.
Tooling: Hand carved Oak Leaf and Waffle with Shell Border.
Special Price $ 1,995.00 # R-2400
C-4100 Ranch Cutting Saddle
Tree: Ranch Cutter, Wood covered Rawhide covered and rawhide laced. The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer.
Size: Available in 16" and 17"
Weight: Approximately 42 lbs.
Gullet Width: 6 ¾" Quarter Horse Arizona Bars
Gullet Height: 7 ½"
Swell: Buster Welch; Width 13"
Skirts: Length 28"; Width 14 ½", lined with genuine bark tan 1" thick wool shearlings, 1" density.
Cantle: Height 3 ½" Width 12”; Dish 1 ¼”; Style 1 ¾” Cheyenne Roll, Hand Sewn, 5 stitches to the inch, 5 cord flax thread.
Horn: Height 3 ½”, Diameter 1 ¾", leather covered, hand sewn.
Stirrup Leathers: 3" with leather covered Blevins Buckles
Stirrups: Wooden bell stirrups with 3" hand laced leather treads.
Rigging: Double dee rigging in 7/8’s position. Hardware is Stainless Steel.
Flank Cincha: 6" tapering to 4" to 1 ¾"; burgundy latigo lined with deluxe stainless steel roller buckles.
Leather: 15-17 oz. Thoroughbred Golden Skirting.
Trim: Hansen Western Gear’s Kansas silver plate conchos. All Hardware including the saddle screws and washers is stainless steel. Saddle strings cut from
premium 7-8 oz. burgundy latigo. We use the Union Lockstitch to sew and pull the 346 white nylon thread tight at 5 1/2 stitches to the inch.
Finish: Each Ranch Cutter first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner. Edges are
burnished by hand rubbing.
Tooling: Hand carved Oak Leaf and Vertical Basketweave with Shell Border.
Special Price $ 2,195.00 # C-4100 Note: Other Oils Available
Tree: Ranch Cutter, Wood covered Rawhide covered and rawhide laced. The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer.
Size: Available in 16" and 17"
Weight: Approximately 42 lbs.
Gullet Width: 6 ¾" Quarter Horse Arizona Bars
Gullet Height: 7 ½"
Swell: Buster Welch; Width 13"
Skirts: Length 28"; Width 14 ½", lined with genuine bark tan 1" thick wool shearlings, 1" density.
Cantle: Height 3 ½" Width 12”; Dish 1 ¼”; Style 1 ¾” Cheyenne Roll, Hand Sewn, 5 stitches to the inch, 5 cord flax thread.
Horn: Height 3 ½”, Diameter 1 ¾", leather covered, hand sewn.
Stirrup Leathers: 3" with leather covered Blevins Buckles
Stirrups: Wooden bell stirrups with 3" hand laced leather treads.
Rigging: Double dee rigging in 7/8’s position. Hardware is Stainless Steel.
Flank Cincha: 6" tapering to 4" to 1 ¾"; burgundy latigo lined with deluxe stainless steel roller buckles.
Leather: 15-17 oz. Thoroughbred Golden Skirting.
Trim: Hansen Western Gear’s Kansas silver plate conchos. All Hardware including the saddle screws and washers is stainless steel. Saddle strings cut from
premium 7-8 oz. burgundy latigo. We use the Union Lockstitch to sew and pull the 346 white nylon thread tight at 5 1/2 stitches to the inch.
Finish: Each Ranch Cutter first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner. Edges are
burnished by hand rubbing.
Tooling: Hand carved Oak Leaf and Vertical Basketweave with Shell Border.
Special Price $ 2,195.00 # C-4100 Note: Other Oils Available
Click on Picture Enlarge
Tree: Ranch Cutter, Custom Batie Rawhide covered and rawhide laced. The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 16" and 17".
Weight: Approximately 42 lbs.
Gullet Width: 6 ¾" QH Bars
Gullet Height: 7 ½"
Swell: Buster Welch; Width 13"
Skirts: Length 28"; Width 14 ½", lined with faux shearling, 90% wool.
Cantle: Height 3 ½" Width 12"; Dish 1 ¼"; Style 1 ¾" Cheyenne Roll, Hand Sewn.
Horn: Height 3 ½", Diameter 1 ¾", leather covered, hand sewn.
Stirrup Leathers: 3" with leather covered Blevins Buckles
Stirrups: Wooden metal bound natural rawhide covered, hand laced bell stirrups with 3" treads.
Rigging: Double dee rigging in 7/8’s position. Hardware is Stainless Steel.
Flank Cincha: 6" tapering to 4" to 1 ¾"; burgundy latigo lined with deluxe stainless steel roller buckles.
Leather: 15-17 oz. Thoroughbred Golden Skirting.
Trim: Horseshoe Brand Floral Slotted Conchos with black accents. All Hardware including the saddle screws and washers is stainless steel. Saddle strings
cut from premium 7-8 oz. burgundy latigo. We use the Union Lockstitch to sew and pull the 346 white nylon thread tight at 5 1/2 stitches to the inch.
Finish: Each Ranch Cutter first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner. Edges are
burnished by hand rubbing.
Tooling: Hand carved floral and Hamley swirl with lined petal border.
Special Price $ 1,995.00 # C-4200
Seat Size: Available in 16" and 17".
Weight: Approximately 42 lbs.
Gullet Width: 6 ¾" QH Bars
Gullet Height: 7 ½"
Swell: Buster Welch; Width 13"
Skirts: Length 28"; Width 14 ½", lined with faux shearling, 90% wool.
Cantle: Height 3 ½" Width 12"; Dish 1 ¼"; Style 1 ¾" Cheyenne Roll, Hand Sewn.
Horn: Height 3 ½", Diameter 1 ¾", leather covered, hand sewn.
Stirrup Leathers: 3" with leather covered Blevins Buckles
Stirrups: Wooden metal bound natural rawhide covered, hand laced bell stirrups with 3" treads.
Rigging: Double dee rigging in 7/8’s position. Hardware is Stainless Steel.
Flank Cincha: 6" tapering to 4" to 1 ¾"; burgundy latigo lined with deluxe stainless steel roller buckles.
Leather: 15-17 oz. Thoroughbred Golden Skirting.
Trim: Horseshoe Brand Floral Slotted Conchos with black accents. All Hardware including the saddle screws and washers is stainless steel. Saddle strings
cut from premium 7-8 oz. burgundy latigo. We use the Union Lockstitch to sew and pull the 346 white nylon thread tight at 5 1/2 stitches to the inch.
Finish: Each Ranch Cutter first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner. Edges are
burnished by hand rubbing.
Tooling: Hand carved floral and Hamley swirl with lined petal border.
Special Price $ 1,995.00 # C-4200
Click on Picture Enlarge
C-4000 Ranch Cutting Saddle
Tree: Custom Ranch Cutter, Batie Rawhide Covered Wood and rawhide laced. The ground work is hand shaped using skirting leather over a 20 gauge saddle
strainer
Seat Size: Available in 16" and 17".
Weight: Approximately 42 lbs.
Gullet Width: 6 ¾" Quarter Horse Arizona Bars
Gullet Height: 7 ½"
Swell: Buster Welch; Width 13"
Skirts: Length 28"; Width 14 ½", lined with genuine bark tan 1" thick wool shearlings, 1" density.
Cantle: Height 3 ½" Width 12"; Dish 1 ¼"; Style 1 ¾" Cheyenne Roll, Hand Sewn, 5 stitches to the inch, 5 cord flax thread.
Horn: Height 3 ½", Diameter 1 ¾", leather covered, hand sewn.
Stirrup Leathers: 3" with leather covered Blevins Buckles
Stirrups: Wooden metal bound leather covered, machine sewn bell stirrups with 3" treads.
Rigging: Double dee rigging in 7/8’s position. Hardware is Stainless Steel.
Flank Cincha: 6" tapering to 4" to 1 ¾"; burgundy latigo lined with deluxe stainless steel roller buckles.
Leather: 15-17 oz. Thoroughbred Walnut Skirting.
Trim: Hansen Western Gear’s Tempe Sterling Silver Overlay Conchos. All Hardware including the saddle screws and washers is stainless steel. Saddle strings
cut from premium 7-8 oz. burgundy latigo. We use the Union Lockstitch to sew and pull the 346 white nylon thread tight at 5 1/2 stitches to the inch.
Finish: Each Ranch Cutter first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner. Edges are
burnished by hand rubbing.
Tooling: Hand carved floral with Carlos Border. - Other Styles Available
Special Price $ 2,395.00 # C-4000 Note: Other Oils Available
Tree: Custom Ranch Cutter, Batie Rawhide Covered Wood and rawhide laced. The ground work is hand shaped using skirting leather over a 20 gauge saddle
strainer
Seat Size: Available in 16" and 17".
Weight: Approximately 42 lbs.
Gullet Width: 6 ¾" Quarter Horse Arizona Bars
Gullet Height: 7 ½"
Swell: Buster Welch; Width 13"
Skirts: Length 28"; Width 14 ½", lined with genuine bark tan 1" thick wool shearlings, 1" density.
Cantle: Height 3 ½" Width 12"; Dish 1 ¼"; Style 1 ¾" Cheyenne Roll, Hand Sewn, 5 stitches to the inch, 5 cord flax thread.
Horn: Height 3 ½", Diameter 1 ¾", leather covered, hand sewn.
Stirrup Leathers: 3" with leather covered Blevins Buckles
Stirrups: Wooden metal bound leather covered, machine sewn bell stirrups with 3" treads.
Rigging: Double dee rigging in 7/8’s position. Hardware is Stainless Steel.
Flank Cincha: 6" tapering to 4" to 1 ¾"; burgundy latigo lined with deluxe stainless steel roller buckles.
Leather: 15-17 oz. Thoroughbred Walnut Skirting.
Trim: Hansen Western Gear’s Tempe Sterling Silver Overlay Conchos. All Hardware including the saddle screws and washers is stainless steel. Saddle strings
cut from premium 7-8 oz. burgundy latigo. We use the Union Lockstitch to sew and pull the 346 white nylon thread tight at 5 1/2 stitches to the inch.
Finish: Each Ranch Cutter first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner. Edges are
burnished by hand rubbing.
Tooling: Hand carved floral with Carlos Border. - Other Styles Available
Special Price $ 2,395.00 # C-4000 Note: Other Oils Available
Click on Picture Enlarge
T-3800 Natural Ride A-Fork with Wade Seat Trail Saddle
Tree: Natural Ride Trail Tree, Custom Fiberglass Covered Wood. The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 15", 16", and 17".
Weight: Approximately 29 lbs.
Gullet Width: 7" Full QH Bars --- Others Available
Gullet Height: 8"
Swell: A-Fork; Width 10".
Skirts: Length 26" (on 16" seat); Width 13 ½" at front and 9" at rear, lined with faux shearling, 90% wool.
Cantle: Height 4"; Width 13"; Dish 1 ½"; Style 1 ½" Natural Rawhide Covered Pencil Roll, Hand Sewn.
Horn: Height 2 ¾", Diameter 2 ½", Leather covered, Hand Sewn.
Stirrup Leathers: 2 ½" with Leather Covered Blevins Buckles, machine sewn and copper riveted at the Blevins Buckles and the top of the fenders.
Stirrups: Wooden metal bound natural rawhide covered, hand laced bell stirrups with 3" treads.
Rigging: Horseshoe Brand Flat Plate in-skirt, 7/8’s position, 2 ½" beveled stainless steel dees in rear.
Flank Cincha: 3" tapering to 1 ¾"; burgundy latigo lined with stainless steel roller buckles.
Leather: 13-15 oz. Mahogany Skirting.
Trim: All Hardware including the saddle screws and washers is stainless steel. Saddle strings cut from premium 5-7 oz. Burgandy latigo. We use the Union
Lockstitch to sew and pull the 277 white nylon thread tight at 5 ½ stitches to the inch.
Finish: Each Natural Ride Trail Saddle first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner.
Edges are burnished by hand rubbing.
Tooling: Carlos Border.
Special Price $ 1,695.00 # T-3800 Bucking Rolls can be left off
Tree: Natural Ride Trail Tree, Custom Fiberglass Covered Wood. The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 15", 16", and 17".
Weight: Approximately 29 lbs.
Gullet Width: 7" Full QH Bars --- Others Available
Gullet Height: 8"
Swell: A-Fork; Width 10".
Skirts: Length 26" (on 16" seat); Width 13 ½" at front and 9" at rear, lined with faux shearling, 90% wool.
Cantle: Height 4"; Width 13"; Dish 1 ½"; Style 1 ½" Natural Rawhide Covered Pencil Roll, Hand Sewn.
Horn: Height 2 ¾", Diameter 2 ½", Leather covered, Hand Sewn.
Stirrup Leathers: 2 ½" with Leather Covered Blevins Buckles, machine sewn and copper riveted at the Blevins Buckles and the top of the fenders.
Stirrups: Wooden metal bound natural rawhide covered, hand laced bell stirrups with 3" treads.
Rigging: Horseshoe Brand Flat Plate in-skirt, 7/8’s position, 2 ½" beveled stainless steel dees in rear.
Flank Cincha: 3" tapering to 1 ¾"; burgundy latigo lined with stainless steel roller buckles.
Leather: 13-15 oz. Mahogany Skirting.
Trim: All Hardware including the saddle screws and washers is stainless steel. Saddle strings cut from premium 5-7 oz. Burgandy latigo. We use the Union
Lockstitch to sew and pull the 277 white nylon thread tight at 5 ½ stitches to the inch.
Finish: Each Natural Ride Trail Saddle first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner.
Edges are burnished by hand rubbing.
Tooling: Carlos Border.
Special Price $ 1,695.00 # T-3800 Bucking Rolls can be left off
Click on Picture Enlarge
Southern Trails Saddle offers the Hedgpeth Easy Ride Trail Saddle T-617
Tree: Custom Made Re-enforced Wood Tree for the Gaited or Non-Gaited Horse
Horn: 3" Leather Wrapped
Cantle: 5" Cheyenne Roll -
Seat: 15", 16", 17" Glove Leather Brown or Black - Ground Strainer Custom Padded Seat
Rigging: Drop D 3/4 - Rear 3 Piece Cinch
Stirrups: 2.5" Leather Wrapped
Leather: Premium English Harness Leather
Special: HD Fleece, Montana Silver, SS Hardware
Weight: 25 lbs.
Monthly Special $ 1,499.00 Compare at $ 1,695.00
Tree: Custom Made Re-enforced Wood Tree for the Gaited or Non-Gaited Horse
Horn: 3" Leather Wrapped
Cantle: 5" Cheyenne Roll -
Seat: 15", 16", 17" Glove Leather Brown or Black - Ground Strainer Custom Padded Seat
Rigging: Drop D 3/4 - Rear 3 Piece Cinch
Stirrups: 2.5" Leather Wrapped
Leather: Premium English Harness Leather
Special: HD Fleece, Montana Silver, SS Hardware
Weight: 25 lbs.
Monthly Special $ 1,499.00 Compare at $ 1,695.00
Click on Picture Enlarge
Southern Trails Saddle offers the Hedgpeth EasyRide Trail Saddle T-608
Tree: Swept Back Swells Custom Made Re-enforced Wood Tree for the Gaited or Non-Gaited Horse
Horn: 3" Leather Wrapped
Cantle: 5" Cheyenne Roll -
Seat: 15", 16", 17" Glove Leather Brown or Black - Ground Strainer Custom Padded Seat
Rigging: Drop D 3/4
Stirrups: 2.5" Leather Wrapped
Leather: Premium English Harness Leather
Special: HD Fleece, Montana Silver, SS Hardware
Weight: 25 lbs.
Monthly Special $ 1,399.00 Compare at $ 1,595.00
Tree: Swept Back Swells Custom Made Re-enforced Wood Tree for the Gaited or Non-Gaited Horse
Horn: 3" Leather Wrapped
Cantle: 5" Cheyenne Roll -
Seat: 15", 16", 17" Glove Leather Brown or Black - Ground Strainer Custom Padded Seat
Rigging: Drop D 3/4
Stirrups: 2.5" Leather Wrapped
Leather: Premium English Harness Leather
Special: HD Fleece, Montana Silver, SS Hardware
Weight: 25 lbs.
Monthly Special $ 1,399.00 Compare at $ 1,595.00
Click on Picture Enlarge
Southern Trails Saddle offers the Hedgpeth Easy Ride Saddle T-615
Tree: Custom Made Re-enforced Wood Tree for the Gaited or Non-Gaited Horse
Horn: 3" Leather Wrapped
Cantle: 5" Cheyenne Roll -
Seat: 15", 16", 17" Glove Leather Brown or Black - Ground Strainer Custom Padded Seat
Rigging: Drop D 3/4
Stirrups: 2.5" Leather Wrapped
Leather: Premium English Harness Leather
Special: HD Fleece, SS Hardware
Weight: 24 lbs.
Monthly Special $ 1,299.00 Compare at $ 1,495.00
Tree: Custom Made Re-enforced Wood Tree for the Gaited or Non-Gaited Horse
Horn: 3" Leather Wrapped
Cantle: 5" Cheyenne Roll -
Seat: 15", 16", 17" Glove Leather Brown or Black - Ground Strainer Custom Padded Seat
Rigging: Drop D 3/4
Stirrups: 2.5" Leather Wrapped
Leather: Premium English Harness Leather
Special: HD Fleece, SS Hardware
Weight: 24 lbs.
Monthly Special $ 1,299.00 Compare at $ 1,495.00
Click on Picture Enlarge
Southern Trails Aussie Saddle - A Great Western Style Outback Saddle
Special : Aussie Swell for added security
Seat Size: 15 1/2" to 18 1/2" Lifetime Padded Seat
Dark Brown, Medium Oil, or Black
All Stainless Steel or Solid Brass Hardware
100% Wool Felt Lined Skirts standard. Pictured with Optional 100% Real Wool lined skirts - Add 125.00
Over sized metal bound hickory military hooded stirrups standard. Pictured w/ Optional Tapaderos - Add 150.00
Weight: 25 lbs
Special Price - 1,595.00 No-Horn Available Add $ 30.00
Special : Aussie Swell for added security
Seat Size: 15 1/2" to 18 1/2" Lifetime Padded Seat
Dark Brown, Medium Oil, or Black
All Stainless Steel or Solid Brass Hardware
100% Wool Felt Lined Skirts standard. Pictured with Optional 100% Real Wool lined skirts - Add 125.00
Over sized metal bound hickory military hooded stirrups standard. Pictured w/ Optional Tapaderos - Add 150.00
Weight: 25 lbs
Special Price - 1,595.00 No-Horn Available Add $ 30.00
Click on Picture Enlarge
Southern Trails - Mountain Plantation Saddle - The Ultimate in Luxury for You and Your Horse - Hand Made in the USA
Tree: Custom Reinforced Wood with Gel Padded Bars
Seat: Special Berber Padded Tuck and Roll Glove Leather 15", 16", 17", 18"
Cantle: 5" Tall - 4" available
Skirts: Felt Lined Leather
Stirrups: Metal Bound Wood Hooded - Others Available
Finish: Light Oil, Medium Oil, Dark Brown, Black
Rigging: Stainless Steel or Brass
Weight: Approx 26 lbs. Priced to fit most Breeds, some slightly Higher
Special: 1,695.00 6 Week Delivery
Tree: Custom Reinforced Wood with Gel Padded Bars
Seat: Special Berber Padded Tuck and Roll Glove Leather 15", 16", 17", 18"
Cantle: 5" Tall - 4" available
Skirts: Felt Lined Leather
Stirrups: Metal Bound Wood Hooded - Others Available
Finish: Light Oil, Medium Oil, Dark Brown, Black
Rigging: Stainless Steel or Brass
Weight: Approx 26 lbs. Priced to fit most Breeds, some slightly Higher
Special: 1,695.00 6 Week Delivery
Click on Picture Enlarge
Southern Trails - Deluxe Mountain Trooper Saddle with Horn Hand Made in the USA
Tree: Custom Reinforced Wood with Brass Pommel
Seat: Gel Foam Padded Glove Leather 16", 17", 18", 19"
Stirrups: Metal Bound Wood Hooded - Others Available
Finish: Light Oil, Medium Oil, Dark Brown, Black - Cordura Available Also
Rigging: Stainless Steel or Brass - English or Western
Weight: Approx 23 lbs.
Special: 1,149.00 Priced to fit most Breeds, some slightly Higher 6 Week Delivery
Tree: Custom Reinforced Wood with Brass Pommel
Seat: Gel Foam Padded Glove Leather 16", 17", 18", 19"
Stirrups: Metal Bound Wood Hooded - Others Available
Finish: Light Oil, Medium Oil, Dark Brown, Black - Cordura Available Also
Rigging: Stainless Steel or Brass - English or Western
Weight: Approx 23 lbs.
Special: 1,149.00 Priced to fit most Breeds, some slightly Higher 6 Week Delivery
Click on Picture Enlarge
Southern Trails - Mountain Trooper Saddle Hand Made in the USA
Tree: Custom Reinforced Wood with Brass Pommel
Seat: Gel Foam Padded Glove Leather 16", 17", 18", 19"
Stirrups: Metal Bound Wood Hooded - Others Available
Finish: Light Oil, Medium Oil, Dark Brown, Black - Cordura Available Also
Rigging: Stainless Steel or Brass - English or Western
Weight: Approx 23-25 lbs.
Special: 949.00 Priced to fit most Breeds, some slightly Higher 6 Week Delivery
Tree: Custom Reinforced Wood with Brass Pommel
Seat: Gel Foam Padded Glove Leather 16", 17", 18", 19"
Stirrups: Metal Bound Wood Hooded - Others Available
Finish: Light Oil, Medium Oil, Dark Brown, Black - Cordura Available Also
Rigging: Stainless Steel or Brass - English or Western
Weight: Approx 23-25 lbs.
Special: 949.00 Priced to fit most Breeds, some slightly Higher 6 Week Delivery
Click on Picture Enlarge
Click on Picture Enlarge
Click on Picture Enlarge
Click on Picture Enlarge
Comfort Series Premium Trail Saddle
Tree: Comfort Trail Tree, Custom Fiberglass Covered Wood The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 15", 16", and 17".
Bars: Available in Semi-QH, Full Quarter Horse, Extra Wide for mutton withers, draft crosses, haflingers, etc.
Weight: Approximately 30 lbs.
Gullet Height: 7.5"
Swell: Width 12.5"
Skirts: Length 26.5" (on 16” seat), lined with faux shearling, 90% wool. Skirts are Close Contact Design
Cantle: Height 3.5"; Width 13"; Dish 1 ½"; Style 1 ½" Cheyenne Roll, Hand Sewn.
Horn: Height 2 ¾", Diameter 2 ½", Leather covered, Hand Sewn.
Stirrup Leathers: 2 ½" with Leather Covered Blevins Buckles, machine sewn and copper riveted
at the Blevins Buckles and the top of the fenders
Stirrups: Wooden metal bound natural rawhide covered, hand sewn and tooled stirrups with 3" treads.
Rigging: Dropped Dee in 7/8’s position. Hardware is Stainless Steel Horseshoe Brand.
Leather: Available with 13-15 oz. Thoroughbred Mahogany, Walnut, or Golden Skirting.
Trim: Cross Conchos, All Hardware including the saddle screws and washers is Stainless Steel. The padded seat is constructed with 3/8" close cell foam
covered with 4-5 oz. chap leather. We use the Union Lockstitch to sew and pull the 277 white nylon thread tight at 5 ½ stitches to the inch.
Finish: Each Saddle first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner.
Tooling: Fully Hand Engraved on Shirts, Housing, Stirrups, Cantle and Pommel
Special Price $ 1,995.00 # T-5008
Tree: Comfort Trail Tree, Custom Fiberglass Covered Wood The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 15", 16", and 17".
Bars: Available in Semi-QH, Full Quarter Horse, Extra Wide for mutton withers, draft crosses, haflingers, etc.
Weight: Approximately 30 lbs.
Gullet Height: 7.5"
Swell: Width 12.5"
Skirts: Length 26.5" (on 16” seat), lined with faux shearling, 90% wool. Skirts are Close Contact Design
Cantle: Height 3.5"; Width 13"; Dish 1 ½"; Style 1 ½" Cheyenne Roll, Hand Sewn.
Horn: Height 2 ¾", Diameter 2 ½", Leather covered, Hand Sewn.
Stirrup Leathers: 2 ½" with Leather Covered Blevins Buckles, machine sewn and copper riveted
at the Blevins Buckles and the top of the fenders
Stirrups: Wooden metal bound natural rawhide covered, hand sewn and tooled stirrups with 3" treads.
Rigging: Dropped Dee in 7/8’s position. Hardware is Stainless Steel Horseshoe Brand.
Leather: Available with 13-15 oz. Thoroughbred Mahogany, Walnut, or Golden Skirting.
Trim: Cross Conchos, All Hardware including the saddle screws and washers is Stainless Steel. The padded seat is constructed with 3/8" close cell foam
covered with 4-5 oz. chap leather. We use the Union Lockstitch to sew and pull the 277 white nylon thread tight at 5 ½ stitches to the inch.
Finish: Each Saddle first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner.
Tooling: Fully Hand Engraved on Shirts, Housing, Stirrups, Cantle and Pommel
Special Price $ 1,995.00 # T-5008
Click on Picture Enlarge
B-5400 Barrel Saddle
Tree: Steele Saddle Tree LLC. The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer (tin seat).
Seat Size: Available in 14 ½", and 15 ½".
Bars: Quarter Horse Bars
Weight: Approximately 29 lbs.
Gullet Width: 6 ½"
Gullet Height: 7 ½"
Swell: Round Fork; Width 12".
Skirts: Length 25" (on 15 ½"seat), 24” on 14 ½" seat; Width 10 ½", lined with faux shearling, 90% wool.
Cantle: Height 4"; Width 11 ¼"; Dish 1 ¼"; Style 1 ½" Cheyenne Roll, Hand Sewn.
Horn: Height 3 ¾", Diameter 1 ¾" Leather covered, Hand Sewn.
Stirrup Leathers: 2 ½" with Leather Covered Blevins Buckles, machine sewn and copper riveted at the Blevins Buckles and the top of the fenders
Stirrups: Off-set Aluminum
Rigging: Stainless Steel C-rigging in-skirt, 7/8’s position, billet access slots in rear.
Leather: 13-15 oz. Thoroughbred Golden Skirting.
Trim: Antique Ranger Star conchos. All Hardware is Stainless Steel. The bicycle style padded seat is constructed with 3/8" close cell foam covered with
chocolate
or black suede. We use the Union Lockstitch to sew and pull the 277 white nylon thread tight at 5 ½ stitches to the inch.
Finish: Each Working Class Barrel Saddle first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner.
Tooling: Floral with basket stamp and Running W border.
Special Price $ 1,395.00 # B-5400
Tree: Steele Saddle Tree LLC. The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer (tin seat).
Seat Size: Available in 14 ½", and 15 ½".
Bars: Quarter Horse Bars
Weight: Approximately 29 lbs.
Gullet Width: 6 ½"
Gullet Height: 7 ½"
Swell: Round Fork; Width 12".
Skirts: Length 25" (on 15 ½"seat), 24” on 14 ½" seat; Width 10 ½", lined with faux shearling, 90% wool.
Cantle: Height 4"; Width 11 ¼"; Dish 1 ¼"; Style 1 ½" Cheyenne Roll, Hand Sewn.
Horn: Height 3 ¾", Diameter 1 ¾" Leather covered, Hand Sewn.
Stirrup Leathers: 2 ½" with Leather Covered Blevins Buckles, machine sewn and copper riveted at the Blevins Buckles and the top of the fenders
Stirrups: Off-set Aluminum
Rigging: Stainless Steel C-rigging in-skirt, 7/8’s position, billet access slots in rear.
Leather: 13-15 oz. Thoroughbred Golden Skirting.
Trim: Antique Ranger Star conchos. All Hardware is Stainless Steel. The bicycle style padded seat is constructed with 3/8" close cell foam covered with
chocolate
or black suede. We use the Union Lockstitch to sew and pull the 277 white nylon thread tight at 5 ½ stitches to the inch.
Finish: Each Working Class Barrel Saddle first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner.
Tooling: Floral with basket stamp and Running W border.
Special Price $ 1,395.00 # B-5400
Click on Picture Enlarge
Click on Picture Enlarge
M-3100 Old Fashined Cowboy Saddle, Many use it for Trails and Mounted Shooting - Round Skirt
Tree: Custom Tree. Rawhide Covered Wood. The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 14", 15 " and 16".
Weight: Approximately 40 lbs.
Gullet Width: 6 ¾" QH BArs
Gullet Height: 8 ½"
Swell: Round Fork; Width 12".
Skirts: Length 27" (on 16"seat); Width 12 ½", lined with faux shearling, 90% wool.
Cantle: Height 4"; Width 13"; Dish 1 ½"; Style ½" Pencil Roll, Hand Sewn.
Horn: Height 3 1/4", Diameter 2 1/4" Leather covered, Hand Sewn.
Stirrup Leathers: 2 ½" with Leather Covered Blevins Buckles, machine sewn and copper riveted at the Blevins Buckles and the top of the fenders
Stirrups: Wooden 3" Bell
Rigging: Sam Stagg in 7/8's position, leather covered stainless steel dees. Rigged with four 1 ¾" tie straps.
Leather: Premium 13-15 oz. Thoroughbred Walnut Skirting.
Trim: All Hardware including the saddle screws and washers is Stainless Steel. Saddle strings on this eight string set hang 36" from the rear button, 18" from
the seat buttons, and 24" from the front button. We use the Union Lockstitch to sew and pull the 277 white nylon thread tight at 5 ½ stitches to the inch.
Finish: Each Mounted Shooter Saddle first receives several warm coats of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner.
Tooling: Running W border.
Style: A unique combination of period styling and today's comfort allow us to offer you a saddle with the authentic look you're after and yet have the feel of a
competition saddle.
Special Price $ 1,895.00 # M-3100 Other Oil Colors Available
Tree: Custom Tree. Rawhide Covered Wood. The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 14", 15 " and 16".
Weight: Approximately 40 lbs.
Gullet Width: 6 ¾" QH BArs
Gullet Height: 8 ½"
Swell: Round Fork; Width 12".
Skirts: Length 27" (on 16"seat); Width 12 ½", lined with faux shearling, 90% wool.
Cantle: Height 4"; Width 13"; Dish 1 ½"; Style ½" Pencil Roll, Hand Sewn.
Horn: Height 3 1/4", Diameter 2 1/4" Leather covered, Hand Sewn.
Stirrup Leathers: 2 ½" with Leather Covered Blevins Buckles, machine sewn and copper riveted at the Blevins Buckles and the top of the fenders
Stirrups: Wooden 3" Bell
Rigging: Sam Stagg in 7/8's position, leather covered stainless steel dees. Rigged with four 1 ¾" tie straps.
Leather: Premium 13-15 oz. Thoroughbred Walnut Skirting.
Trim: All Hardware including the saddle screws and washers is Stainless Steel. Saddle strings on this eight string set hang 36" from the rear button, 18" from
the seat buttons, and 24" from the front button. We use the Union Lockstitch to sew and pull the 277 white nylon thread tight at 5 ½ stitches to the inch.
Finish: Each Mounted Shooter Saddle first receives several warm coats of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner.
Tooling: Running W border.
Style: A unique combination of period styling and today's comfort allow us to offer you a saddle with the authentic look you're after and yet have the feel of a
competition saddle.
Special Price $ 1,895.00 # M-3100 Other Oil Colors Available
Southern Trails Custom Aussie Plantation
Special : Aussie Swell for added security
Seat Size: 15 1/2" -18 1/2" Lifetime Padded Seat
Rigging: Western Double Drop Dee
Finish: Dark Brown, Medium Oil, or Black
All Stainless Steel or Solid Brass Hardware
100% Wool Felt Lined Skirts standard.
Over sized metal bound hickory military hooded stirrups standard.
Weight: 25 lbs
Special Price - 1,695.00
Special : Aussie Swell for added security
Seat Size: 15 1/2" -18 1/2" Lifetime Padded Seat
Rigging: Western Double Drop Dee
Finish: Dark Brown, Medium Oil, or Black
All Stainless Steel or Solid Brass Hardware
100% Wool Felt Lined Skirts standard.
Over sized metal bound hickory military hooded stirrups standard.
Weight: 25 lbs
Special Price - 1,695.00
Click on Picture Enlarge
Southern Trails Reining Saddle # RN-9000
Tree: DL Reiner, rawhide covered and rawhide laced. The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer (tin seat). We
shape this leather to sit you comfortably in the saddle eliminating the need for all the fancy-named thick padding that many are using today to cover poor
ground work.
Seat Size: Available in 15.5", 16" and 16.5".
Bars: Full Quarter Horse Bars 7" Gullet - others available
Weight: Approximately 36 lbs.
Gullet Height:8"
Swell: Reiner; Width 13"
Skirts: Length 27"; Width 14", lined with genuine bark tan 1" thick wool shearlings, 1" density.
Cantle: Height 3" Width 12½"; Dish 1 ¼"; Style 2½" Cheyenne Roll, Hand Sewn.
Horn: Height 2 ¼", Diameter 2", leather covered, hand sewn.
Stirrup Leathers: 2½" with leather covered Blevins Buckles
Stirrups: Wooden metal bound leather covered, machine sewn bell stirrups with 3" treads.
Rigging: Double dee rigging in full position. Hardware is Stainless Steel.
Leather: 13-15 oz. Thoroughbred Golden, Mahogany, or Walnut Skirting.
Trim: Sterling Silver Overlay Conchos with tips. All Hardware including the saddle screws and washers is stainless steel. We use the Union Lockstitch to sew
and pull the 277 white nylon thread tight at 5 1/2 stitches to the inch.
Finish: Each Reiner receives a coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner. Edges are burnished by hand .
Tooling: Hand carved floral with Hamley swirl.
Special Price $ 2,495.00 # RN-9000
Tree: DL Reiner, rawhide covered and rawhide laced. The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer (tin seat). We
shape this leather to sit you comfortably in the saddle eliminating the need for all the fancy-named thick padding that many are using today to cover poor
ground work.
Seat Size: Available in 15.5", 16" and 16.5".
Bars: Full Quarter Horse Bars 7" Gullet - others available
Weight: Approximately 36 lbs.
Gullet Height:8"
Swell: Reiner; Width 13"
Skirts: Length 27"; Width 14", lined with genuine bark tan 1" thick wool shearlings, 1" density.
Cantle: Height 3" Width 12½"; Dish 1 ¼"; Style 2½" Cheyenne Roll, Hand Sewn.
Horn: Height 2 ¼", Diameter 2", leather covered, hand sewn.
Stirrup Leathers: 2½" with leather covered Blevins Buckles
Stirrups: Wooden metal bound leather covered, machine sewn bell stirrups with 3" treads.
Rigging: Double dee rigging in full position. Hardware is Stainless Steel.
Leather: 13-15 oz. Thoroughbred Golden, Mahogany, or Walnut Skirting.
Trim: Sterling Silver Overlay Conchos with tips. All Hardware including the saddle screws and washers is stainless steel. We use the Union Lockstitch to sew
and pull the 277 white nylon thread tight at 5 1/2 stitches to the inch.
Finish: Each Reiner receives a coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner. Edges are burnished by hand .
Tooling: Hand carved floral with Hamley swirl.
Special Price $ 2,495.00 # RN-9000
Comfort Series Trail Saddle - Square skirt
Tree: Comfort Trail Tree, Custom Fiberglass Covered Wood The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 15", 16", and 17".
Bars: Available in Simi-QH, Full Quarter Horse, Extra Wide for mutton withers, draft crosses, haflingers, etc.
Weight: Approximately 30 lbs.
Gullet Height: 7.5"
Swell: A-Fork; Width 10".
Skirts: Length 26" (on 16” seat); Width 11" at front and 9" at rear, lined with faux shearling, 90% wool.
Cantle: Height 4"; Width 13"; Dish 1 ½"; Style 1 ½" Cheyenne Roll, Hand Sewn.
Horn: Height 2 ¾", Diameter 2 ½", Leather covered, Hand Sewn.
Stirrup Leathers: 2 ½" with Leather Covered Blevins Buckles, machine sewn and copper riveted
at the Blevins Buckles and the top of the fenders
Stirrups: Wooden metal bound natural rawhide covered, hand laced bell stirrups with 3" treads.
Rigging: Dropped plate rigging in 7/8’s position. Hardware is Stainless Steel Horseshoe Brand.
Leather: Available with 13-15 oz. Thoroughbred Mahogany, Walnut, or Golden Skirting.
Trim: Horseshoe Brand Cathedral Conchos with Tie Loops, All Hardware including the saddle screws and washers is Stainless Steel. Saddle strings cut
from premium 5-7 oz. burgundy latigo. The bicycle style padded seat is constructed with 3/8" close cell foam covered with 4-5 oz. chap leather. We use
the Union Lockstitch to sew and pull the 277 white nylon thread tight at 5 ½ stitches to the inch.
Finish: Each B-Light Trail Saddle first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner.
Tooling: Border Tooled with stems and turnbacks.
Special Price $ 1,295.00 # T-9400 Bucking Rolls Add $85.00
Tree: Comfort Trail Tree, Custom Fiberglass Covered Wood The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 15", 16", and 17".
Bars: Available in Simi-QH, Full Quarter Horse, Extra Wide for mutton withers, draft crosses, haflingers, etc.
Weight: Approximately 30 lbs.
Gullet Height: 7.5"
Swell: A-Fork; Width 10".
Skirts: Length 26" (on 16” seat); Width 11" at front and 9" at rear, lined with faux shearling, 90% wool.
Cantle: Height 4"; Width 13"; Dish 1 ½"; Style 1 ½" Cheyenne Roll, Hand Sewn.
Horn: Height 2 ¾", Diameter 2 ½", Leather covered, Hand Sewn.
Stirrup Leathers: 2 ½" with Leather Covered Blevins Buckles, machine sewn and copper riveted
at the Blevins Buckles and the top of the fenders
Stirrups: Wooden metal bound natural rawhide covered, hand laced bell stirrups with 3" treads.
Rigging: Dropped plate rigging in 7/8’s position. Hardware is Stainless Steel Horseshoe Brand.
Leather: Available with 13-15 oz. Thoroughbred Mahogany, Walnut, or Golden Skirting.
Trim: Horseshoe Brand Cathedral Conchos with Tie Loops, All Hardware including the saddle screws and washers is Stainless Steel. Saddle strings cut
from premium 5-7 oz. burgundy latigo. The bicycle style padded seat is constructed with 3/8" close cell foam covered with 4-5 oz. chap leather. We use
the Union Lockstitch to sew and pull the 277 white nylon thread tight at 5 ½ stitches to the inch.
Finish: Each B-Light Trail Saddle first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner.
Tooling: Border Tooled with stems and turnbacks.
Special Price $ 1,295.00 # T-9400 Bucking Rolls Add $85.00
Square Skirt Version at bottom of page
Click on Picture Enlarge
T-8006 A-Fork Lady Wade Soft Seat
Tree: Batie Rawhide covered and rawhide laced. The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 15" and 16" Cushioned Bicycle Style
Weight: Approximately 33 lbs.
Gullet Width: 6.75" Quarter Horse Bars - Other Available
Gullet Height: 7 3/4"
Swell: Width 10 ½"
Skirts: Length 26 ½"; Width 12", lined with faux shearling, 90% wool.
Cantle: Height 4" Width 12 ½"; Dish 1 ½"; Style ½" Natural Rawhide Covered Pencil Roll, Hand Sewn.
Horn: Height 3", Diameter 3", rawhide tipped, leather covered, hand sewn with mule hide horn wrap.
Stirrup Leathers: 3" with leather covered Blevins Buckles
Stirrups: Wooden metal bound natural rawhide covered, hand laced bell stirrups with 3" treads.
Rigging: Dropped plate rigging in 7/8’s position. Hardware is Stainless Steel Horseshoe Brand.
Flank Cincha: 4" to 1 ¾"; burgundy latigo lined with deluxe stainless steel roller buckles.
Leather: 11-13 oz. Premium Thoroughbred Golden Skirting. Walnut and Mahogany Available
Trim: All Hardware including the saddle screws and washers is stainless steel. Saddle strings cut from premium 7-8 oz. burgundy latigo. We use the Union
Lockstitch to sew and pull the 277 white nylon thread tight at 5 1/2 stitches to the inch.
Finish: Each Working Rancher receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner. Edges are
burnishedby hand rubbing.
Tooling: Hand Tooled Basket with Barbed Wire Border
Special Price $ 1,995.00 # T-8006
Tree: Batie Rawhide covered and rawhide laced. The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 15" and 16" Cushioned Bicycle Style
Weight: Approximately 33 lbs.
Gullet Width: 6.75" Quarter Horse Bars - Other Available
Gullet Height: 7 3/4"
Swell: Width 10 ½"
Skirts: Length 26 ½"; Width 12", lined with faux shearling, 90% wool.
Cantle: Height 4" Width 12 ½"; Dish 1 ½"; Style ½" Natural Rawhide Covered Pencil Roll, Hand Sewn.
Horn: Height 3", Diameter 3", rawhide tipped, leather covered, hand sewn with mule hide horn wrap.
Stirrup Leathers: 3" with leather covered Blevins Buckles
Stirrups: Wooden metal bound natural rawhide covered, hand laced bell stirrups with 3" treads.
Rigging: Dropped plate rigging in 7/8’s position. Hardware is Stainless Steel Horseshoe Brand.
Flank Cincha: 4" to 1 ¾"; burgundy latigo lined with deluxe stainless steel roller buckles.
Leather: 11-13 oz. Premium Thoroughbred Golden Skirting. Walnut and Mahogany Available
Trim: All Hardware including the saddle screws and washers is stainless steel. Saddle strings cut from premium 7-8 oz. burgundy latigo. We use the Union
Lockstitch to sew and pull the 277 white nylon thread tight at 5 1/2 stitches to the inch.
Finish: Each Working Rancher receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner. Edges are
burnishedby hand rubbing.
Tooling: Hand Tooled Basket with Barbed Wire Border
Special Price $ 1,995.00 # T-8006
